Non-isothermal drying of bio-wastes: Kinetic analysis and determination of effective moisture diffusivity.

A macro-thermogravimetric analysis (macro-TGA) was applied to analyse the non-isothermal drying of different bio-wastes (quince solid waste, grape marc and pumpkin shell from different enterprises located in San Juan Province, Argentina). The experimental data were obtained at three heating rates (5, 10 and 15 K/min) and two different initial moisture contents (30 and 50% w/w). These data were fitted using the Coats-Redfern and Sharp methods. The D2 model showed the best fitting for all experiments when using the Coats-Redfern method. It is assumed that drying occurs on the solid boundary. The predicted Ea values ranged from 43.60 to 64.50 kJ/mol for the three bio-wastes under the different experimental conditions. The Ea value slightly increases with the increase in heating rate because the wastes require more energy to undergo drying. Deff increases moderately with temperature at the beginning of the dehydration process; then, this increasing behaviour is significant due to the loss of continuous moisture channels. Otherwise, Deff increases with the initial moisture content, showing that the humidity of the samples did not reach the saturation content.

An energy-friendly alternative in the large-scale production of soybean oil.

Soybean oil is widely used as cooking oil, whereas the soybean cake is a valuable ingredient for animal food. The extraction of soybean oil is an energy-intensive process, with additional significant impact on the environment via the wastewater and hexane emissions. The research investigated different ways to minimize the energy consumption. In a traditional process, both direct (live) steam and indirect steam heating (jackets, tubular exchangers) are used to deliver the required heat duty. Direct steam injection is restricted to the first evaporator and the stripper, for a total of 620 kg/h. Indirect steam is also applied in the evaporators for a total of 6.44 MW. The desolventizing process requires a steam energy input of 8.15 MW. Integration of a heat exchanger network in the evaporation and stripping part of the process reduces the amount of direct steam usage from 620 kg/h to 270 kg/h and of the indirect heat duty from 6.44 to 5.05 MW. In the cake desolventizing part of the process, the energy requirement is reduced from 8.15 to 2.12 MW. The overall gross energy saving is hence ∼50%. The improvements moreover reduce both the waste water loadings by 56.5% and the CO2 emissions by 62.5%. Hexane emissions are moreover significantly (>90%) reduced.